У кого есть таблица ГЛАВНЫХ ПАР трансферов и редукторов скиньте плиз сюды!!! В поиск не пинать 3 часа без толку!!!
Или кто знает от GT-A EVO7 2002 подойдёт трасфер на EVO7 2001 МКПП? оба ACD и AYC? По парам или менять вместе с задним редуктором?

Выкладываю.

Mitsubishi Lancer Evolution Transmission & Differential Information
Evolution IV, V, VI, VII &VIII Transmission/Differential
and other technical Information
The Mitsubishi Lancer Evolutions IV, V, VI, T.M.Edition, VII & VIII
have a large variety of transmission and differential options available. This information bulletin is intended
to help you choose the correct transmission and differential specification for your purpose and to allow you
to comply with the relevant technical regulations.
Original Equipment Choices:
The standard Lancer Evolution IV, V,VI & T.M.Edition cars were produced by Mitsubishi Motors Corporation
("MMC") with two choices of:
A. Gearbox ratios
B. Front differential
C. Final drive ratio
These are standard MMC parts and are all homologated in Groups N & A. In simple terms, they are
as follows:
A. Gearbox ratios:
Gear Teeth Ratio Gear Teeth Ratio
1 39/14 2.785 1 39/14 2.785
2 39/20 1.95 2 39/20 1.95
3 38/27 1.407 3 39/27 1.444
4 33/32 1.031 4 34/31 1.096
5 32/42 0.761 5 33/40 0.825
0.461538462 2.166667
x x 3.416
R
41/26
3.416 R
41/26
Constant xxxx xxxx Constant xxxx xxxx
B. Front differential
The cars were available with either a normal open differential or a helical gear Limited Slip Differential
('worm gear' type). The front differential and the Viscous Coupling Unit for the centre differential are both
located inside the transfer box (not in the main gearbox).
C. Final drive ratios
Front E4 Rr E5/6
Rr
Front E4 Rr E5/6 Rr
Ratio 4.529 3.323 3.307 Ratio 4.875 3.323 3.307
No.of teeth 77/17 53/16 43/13 No. of teeth 78/16 53/16 43/13
The above three items can be used within Group A and N regulations, in many combinations of the three.
There is a separate sheet which shows the MMC part No's for these parts, included in our catalogue.
Individual parts No's for items within the gearboxes, differentials and transfers can be obtained
from the Co-ordSport parts catalogues.
Mitsubishi Lancer Evolution Transmission & Differential Information
Competition Differentials:
Co-ordSport is able to supply a variety of special differentials, as follows:
A. Ralliart Front Limited Slip Differential Kit – Original Version
(RA763555S1/2)
This offers a mechanical plated type Front Limited Slip Differential, together with an uprated Viscous .
Coupling Unit ('VCU') for the Centre Differential. The kit includes the LSD unit, the VCU and also
replacement output flange and output shafts, together with an 'O' ring seal. Each of these parts is available
separately. However, service parts are not always readily available for the LSD unit.
The Ralliart LSD unit can only be fitted with the uprated VCU, due to a different PCD on the fitting flange,
compared with the standard/original parts. For this reason, this kit is not allowed under Group N regulations.
The Ralliart Front LSD and uprated viscous Kit is only homologated for Group A, but is ideal for private
drivers who cannot have available a variety of different specification components for different surfaces/events.
The Ralliart mechanical front LSD unit is stronger than a standard/Group N part and is, therefore, more reliable
than the original equipment helical gear type LSD.
B. Ralliart Front Limited Slip Differential Kit – Latest Versions
(RA763555N3/RA580103S1)
In line with the regulations Ralliart Inc. has homologated an LSD unit to work with the standard viscous
coupling of the E5/6 - RA763555N3.
A similar unit has been developed and homologated for the Evolution 7, to work with the Active Centre Diff.
(ACD) - RA580103S1
C. KAAZ Front and Centre Limited Slip Differential Kits - E4/7
KAAZ is a Japanese Company, which manufactures LSD units for a range of Japanese makes and models
of car. For the Evolution Lancers 1 - 7 they produce two mechanical, plated Limited Slip Differential units,
which replace the Front and Centre Differentials. KAAZ also make available service and maintenance parts.
For different conditions and driver preferences the KAAZ LSD can be set-up with different pre-loads.
However, the KAAZ LSD's are not legal for use under Group N rules - as they are not homologated and you
must retain the standard Viscous Coupling.
For Group A and Open Regulations use the KAAZ front and centre LSD units can be installed. The
centre LSD is installed in the gearbox, whilst the original VCU, which as standard is within the Transfer Box,
is removed when the front LSD is fitted therein. The KAAZ original casings can prove to be not up to the job,
when a big increase of torque and power is achieved. Co-ordSport has available various special components
manufactured from better material and with improved heat treatment finish.
D. ATS/Cusco Front/Centre Limited Slip Differential Kit
The LSD's produced by ATS and Cusco are similar to the KAAZ items, but the ATS can only be fitted as a
set (ATS Front LSD, with ATS Centre LSD). They are not legal for Group N use and can only be used within
Group A or Open Regulations.
We can supply KAAZ, Cusco and ATS LSD kits to suit a large selection of car.
Mitsubishi Lancer Evolution Transmission & Differential Information
5 Speed Competition Transmissions:
Ralliart Inc. has developed, together with Hewland Engineering in the UK, a variant option set of 5 speed
ratios, as follows,
Gear Teeth Ratio
1 36/12 3.00
2 26/13 2.00
3 25/17 1.47
4 20/18 1.111
5 24/28 0.857
2.166666667
x 3.416
41/26
R
Constant xxxx Xxxx
Available with a 4.307 final drive (56/13).
*More details available in the Ralliart Assembly Manual at www.ralliart.com/01topics/topics10/index.html
The complete assembly in a casing is currently priced at £7,500-, whilst the gearkit is £6000-. An
assembly jig is required for maintenance, which is priced at £203.04.
This is homologated for the Evo’ s 5 & 6 (CP9A) and also for the Evolution 7 in Group N. With effect
from 01/07/01 any Group N homologation is now also valid for Group A.
Co-ordSport stocks and recommends the Ricardo Transmissions (formerly Gemini) dog-type transmission
system with 5 speeds. This is priced at £7,500 for the basic 5 speed version (price is for a kit installed
in a new casing), which utilises a standard gearbox casing & mates to a standard transfer, with dog-type
gears for added strength and quick gearchanges (ratios and teeth counts are as Group N homologation,
or "Special" and gearchange is H-pattern).
The 5 speed dog-type gearbox can utilise any of the above LSD options, but is only homologated in
Group N with the standard helical gear type and the new Ralliart homologated version.
Ricardo (Gemini) 5-speed dog-type gearbox ratios:
Homologated (Grp.N) ratios: Homologated (Grp.N) ratios:
Ratio Set No.1 (w/4.529) Ratio Set No.2 (w/4.307)
Gear Teeth Ratio Gear Teeth Ratio
1 39/14 2.785 1 36/12 3
2 39/20 1.95 2 26/13 2
3 39/27 1.444 3 25/17 1.47
4 34/31 1.096 4 20/18 1.111
5 33/40 0.825 5 24/28 0.857
2.166666667 2.16666667
x 3.416 x 3.416
R
41/26
R
41/26
Constant Xxxx xxxx Constant xxxx Xxxx
Mitsubishi Lancer Evolution Transmission & Differential Information
Non-Homologated Ratios
(with any final drive below)
Gear Teeth Ratio
1 39/14 2.785
2 39/20 1.95
3 33/20 1.65
4 30/22 1.363
5 34/31 1.096
2.166666667
x 3.416
41/26
R
Constant Xxxx Xxxx
Available with 4.307, 4.529 and 4.875 final gears and now a special 4.2 (15/63), 3.94 final gears
(4.2 & 3.9 final drive ratios are not homologated under FIA regulations). For Group N regulations Ratio
Set No.1 must be used with 4.529 and Ratio Set No. 2 must be used with 4.307 final ratio. For Group A
regulations, either of Set 1 or 2 can be used with any of the 3 homologated final drives.
Special Notes
It is still recommended to use the clutch when changing gear with the dog kits, especially when changing up.
This type of gear kit requires more maintenance than a standard gearbox.
More details available in Gemini Assembly Manual at
www.coordsport.com/Transmission.asp
Mitsubishi Lancer Evolution Transmission & Differential Information
6 Speed Factory Specification Group A Transmission (E5/6):
Ralliart Inc. makes available the Group A 6-speed X-Trac transmission, with sequential change system.
The gearbox ratios are:
Gear Teeth Ratio
1 34/12 2.833
2 33/16 2.063
3 32/19 1.684
4 29/21 1.381
5 27/23 1.174
6 24/24 1.000
14/12
x 3.25
R
39/14
Front Diff
(Stepoff)
14/65 4.633
Rr. Diff
(Dropoff)
19/25 1.316
Ctr. Diff.
(T/F)
24/20 0.833
Special transfer assembly including front LSD (35/5) and Centre Viscous coupling
(VCT = 110 Kg/m) is available. Also rear differential with 4.222 ratio (9/3 and LSD (35/5).
The complete package including the following:
Gearbox
Triple plate Carbon clutch, by AP Racing
Transmission oil cooler system (Laminova)
Transfer assembly
Propeller Shaft (steel)
Rear differential assembly
Gear change mechanism
Starter Assembly
Transmission mountings/fixings
is priced around £80,000-. Special Driveshafts are also available, but these depend upon the specification of
suspension to be used. An electronically controlled centre differential is also available.
Mitsubishi Lancer Evolution Transmission & Differential Information
Evolution VII
The Evolution VII was homologated effective 01 April 2001 (A/N5629). The basic
transmission
st
details are:
A. Gearbox ratios (Japanese domestic versions)
GSR Model (1 gear not homologated for motorsports) st
Gear Teeth Ratio
1 41/14 2.928
2 39/20 1.95
3 38/27 1.407
4 33/32 1.031
5 31/43 0.72
2.166666667
x 3.416
R
41/26
Constant xxxx xxxx
RS Model - Brembo brake version(RS-2) RS Model Hi-#######/15" (option)
Gear Teeth Ratio Gear Teeth Ratio
1 39/14 2.785 1 39/14 2.785
2 39/20 1.95 2 39/20 1.95
3 38/27 1.407 3 39/27 1.444
4 33/32 1.031 4 34/31 1.096
5 31/43 0.72 5 33/40 0.825
2.166666667 2.16666667
x 3.416 x 3.416
R
41/26
R
41/26
Constant xxxx xxxx Constant xxxx xxxx
B. Front Differential
The cars are available with either the helical gear Limited Slip Differential or a normal open differential.
The front differential is housed in the transfer box, together with the Active Centre Differential
(ACD) or the alternative Viscous Coupling Unit. (VCU is not homologated).
C. Centre Differential
The cars are available with the all new, electrically controlled Active centre Differential (ACD).
Basically this is a multiplate clutch in place of a centre differential with a VCU. Increasing or decreasing the
hydraulic pressure to govern the clamping forces between the plates modulates the centre differential's lock
ratio.
Mitsubishi Lancer Evolution Transmission & Differential Information
C. Centre Differential cont.
The ACD is operated via an ECU, utilising a variety of information including the driving conditions and the driver's
intentions. Sensors track the steering angle, throttle opening, speed of each wheel, longitudinal and lateral
Gs, etc.
The driver can choose with just a little flick of a switch, the ACD's three settings: Tarmac, Gravel or Snow.
It is anticipated that Ralliart will produce special ECU's for the ACD system, to suit different types
of rally road surface types. (e.g. Gravel or Tarmac), although it is uncertain whether these will be permitted
for Group N use.
A. Final drive ratios
GSR Model RS Model
Front Rear Front Rear
Ratio 4.529 3.307 Ratio 4.529 3.307
No. of Teeth 77/17 43/13 No. of
Teeth
77/17 43/13
Co-ordSport Transmission Service
Co-ordSport is able to offer a complete build and overhaul service for all the above transmissions.
Call for more details or a quote.
For non-motorsports customers we can also rebuild gearboxes and install alternative options,
such as E7 ratios for E5/6's or alternative 4.1:1 final drive.
This bulletin is not intended as a comprehensive guide to all information and data on the transmissions of
the Mitsubishi Lancer Evolutions IV,V, VI,VII & VIII (Carisma GT) Rather as a guide which can help
you choose which basic package is ideally suited for your purpose. Should you require further detailed
information, please do not hesitate to contact the Co-ordSport office.
Co-ordSport Limited
www.coordsport.com
Mitsubishi Lancer Evolution Transmission & Differential Information
Additional Information
GEAR RATIOS SET A SET B SET C SET D SET E SET F
1st 2.785 2.785 2.928 2.785 3 2.909
2nd 1.95 1.95 1.95 1.95 2 1.944
3rd 1.407 1.444 1.407 1.407 1.47 1.434
4th 1.031 1.096 1.031 1.031 1.111 1.100
5th 0.761 0.825 0.72 0.72 0.857 0.868
6th - - - - - 0.693
EVO 4
PART NUMBER CODE RATIOS FINAL
DRIVE
RATIO
SPEEDO DRIVE GEAR
MD975146 W5M51-1-X6A A 4.529 29/36
MD975147 W5M51-1-X7A A 4.529 30/36
MD975148 W5M51-1-Z6A1 B 4.875 29/36
MD975666 W5M51-1-Z7A B 4.875 30/36
MD975668 W5M51-1-X6A1 B 4.529 29/36
MD975669 W5M51-1-X7A2 B 4.529 30/36
EVO 5 & 6
PART NUMBER CODE RATIOS FINAL
DRIVE
RATIO
SPEEDO DRIVE GEAR
MD 976580 W5M51-2-X6A A 4.529 29/36
MD 976581 W5M51-2-X6A1
(X6A5)
A 4.529 29/36
MD 976582 W5M51-2-Z6A B 4.875 29/36
MD 976583 W5M51-2-X6A2 B 4.529 29/36
MD 976584 W5M51-2-Z6A1 B 4.875 29/36
MD 976585 W5M51-2-X6A3
(X6A7)
B 4.529 29/36
EVO 6
PART NUMBER CODE RATIOS FINAL
DRIVE
RATIO
SPEEDO DRIVE GEAR
MR581782 W5M51-2-X6A4 A 4.529 29/36
MR581784 W5M51-2-X6A6 B 4.529 29/36
MR581783 W5M51-2-X6A5 ? ? ?
MR581785 W5M51-2-X6A7 ? ? ?
MR533455 W5M51-2-???? ? ? ?
Mitsubishi Lancer Evolution Transmission & Differential Information
EVO 7
PART NUMBER CODE RATIOS FINAL
DRIVE
RATIO
SPEEDO
DRIVE GEAR
MR953341 W5M51-2-X5B C 4.529 28/36
MR953342 W5M51-2-X5B1 D 4.529 28/36
MR953343 W5M51-2-X5B2 B 4.529 28/36
MR953345 W5M51-2-X5B3 D 4.529 28/36
MR953346 W5M51-2-X5B4 B 28/36
RA553455S1 ? E 4.307 28/36
EVO 8
PART NUMBER CODE RATIOS FINAL
DRIVE
RATIO
SPEEDO
DRIVE GEAR
MN132375 W5M51-2-X5BA B 4.529 ?
MN132225 W6MAA-1-GFNF F 4.583 ?
USA Model EVO 8
PART NUMBER CODE RATIOS FINAL
DRIVE
RATIO
SPEEDO
DRIVE GEAR
SYGFZ W5M51-2-?? C 4.529
Transfer box data -
MD748267 E4 with LSD (helical)
MD748268 E4 without LSD
MR410523 (MR498816) E5/6 with LSD (helical)
MR410524 E5/6 without LSD
MR498816 (MR953775) E6 RS with LSD (helical)
MR498817 E6 without LSD
MR498818 E6 with LSD, option T4U/TLM/SOM/SOL
MR498819 E6 T.M. with LSD, option T42
MR498812 E7 (VCU)
MR498813 E7 (VCU + LSD)
MR580073 E7 (RS with ACD)
MR580104 E7 (ACD + LSD
MR980314 E7 RS-2
MR980932 E8 (All)
Mitsubishi Lancer Evolution Transmission & Differential Information
Rear Diff. Data
E4
MR222000 GSR 3.323 AYC
MR241340 RS 3.323
E5/6
MR410481 GSR 3.307 AYC
MR414838 RS/RS-2, 3.307
MR477548 GSR / RS-2, 3.307 AYC
GSR 3.307 AYC
E8
MN133891
MR580745
Group N homologation data, Important notes, especially for Evolution 6 & 7
E7
MR414838 RS 3.307
MR580010
1. Limited Slip Differentials are allowed at the front and rear of the Evolution 4 - 7 Lancer, provided they
Car spec. Ratio Set Final Drive Homologation
15" wheel/brakes Super-####### ratio Standard ratio (4.5) N5585(01/01VO+02/01ET)
15" wheel/brakes Super-####### ratio Low Ratio (4.875) N-5585 (01/01VO)
Standard ratio
17" wheel/brakes
3.The following gear ratios have been homologated for the Evo.7 under FIA Group N regulations:
Car Spec. Ratio Set Final Drive Homologation
17" wheel/brakes RS-2 Std. Brembo Ratio(4.5) Base
15" wheel/brakes RS Std. Hi-####### Ratio (4.5) VO (as E6)
15"or17"wheel/brakes Hewland dog-type Variant Option (4.3) Part VO
(Also front mechanical LSD and Titanium Turbo).
are the homologated versions.
2. The following gear ratios are permitted for an Evo. 6 under FIA Group N regulations, from 01/01/01
17" wheel/brakes Standard Ratio (4.5) A-5585
Hewland dog-type Variant Option (4.3) N-5585 (Part VO)
Mitsubishi Lancer Evolution Transmission & Differential Information
Group N homologation data, Important notes, especially for Evolution 6 & 7
cont.
4. The twin plate clutch is expressly forbidden, even the Mitsubishi standard original equipment version.
6. Evo. 6 must use the Evo. 6 engine perfectly, so pay attention to:
a) Turbocharger (TD05HRA) Ti-Al Alloys turbine
c) Intercooler
7. Maximum wheel size for E6 with 15" brakes is 6.5 x 15"
9. Evo. 7 with 15" brakes can use any wheel upto a maximum of 8.0 x 17"
Turbocharger Assy identification information
5. The Evo. 6 cannot adopt 2 x cooling fans on the radiator. One standard pull fan is permitted only.
B) Thermostat case
d) Pistons
8. Evo. 7 is only to be homologated with the Active Centre Differential (not VCU option).
Model Part No.
Remarks
EVO5 RS MR431439
EVO5 GSR MR431439
EVO6 RS MR497077 Titanium T/C Big Compressor
EVO6 GSR MR481451 Inconel T/C (not for Group N)
EVO6 T/M RS MR497077
Titanium T/C Big Compressor
EVO6 T/M GSR MR552116
Hi-Response Titanium T/C (not for Group N)
Special road car conversions
We now have available a mechanical LSD assy which can be installed in the AYC rear differential assy
of the Evolution 4 -7.
So if you have any problems with your AYC system you can transform it to mechanical operation. A
must for reliable regular track day use!
Evolution 7/8 Active Centre Diff - Special ECU
Ralliart has developed special ECU's for the Evo.7's Active centre Diff, for Gravel and Tarmac specifications.
Co-ordSport can also offer the GEMS adjustable ACD ECU, programmed by our technical partners, MEM.
This is the same as used on the successful TEAM MITSUBISHI MOTORSPORTS AMERICA open class cars
in the SCCA Pro Rally series.( cars built by MEM, run by Vermont Sports Car)

это ты в тему мне запостил
вчера подбил свой задний редуктор :)))

вот что смотрю
на 5 эво гср
E5/6
MR410481 GSR 3.307 AYC
MR414838 RS/RS-2, 3.307
MR477548 GSR / RS-2, 3.307 AYC
GSR 3.307 AYC

получается пара - 3.307 - как и на 6 эво
а мне в сервисе сказали что по докам - 3.312 пара - и ее нигде нет :((
кому верить? :))

Нет не я. 3.307 3.312 вообще с какого эво? Вскрой лючок и посчитай кол-во зубьев.

ok

3,312 это у 4

по мануалу тоже написано что у 5 эво - 3.312 и по каталогам
вообщем я понял что надо открывать и считать зубья и считать - передаточное число