[pic:384d503135]1872[/pic:384d503135]
Взвесил- 6.9кг(на этих же весах ТЕ37 весят 7.4 !!!!!!)
ЗЫ Спасибо Химе.... долго канеш вёз... но НГ всё такое .. я его прощаю :lol: срочности не было
ЗЫЫ подробнее о технологии
Semi-Solid Forging (SSF) Manufacturing Technology
Extracting the best qualities of casting (unlimited design possibilities) and forging (lightweight and high strength) and combining them in the uniquely new mass production manufacturing process of SSF.
Forging is the process of forcing a solid billet of aluminum alloy between forging dies under an extreme amount of pressure. This creates a finished product that is very dense, very strong. Less aluminum alloy is used to meet the strength requirements for the intended application resulting in very lightweight wheels. The costs of tooling, development, equipment, etc., limit the designs available and usually demand a high price in the aftermarket. Many racers have been willing to pay the premium price required to acquire strong wheels that are lightweight.
The casting process, pouring molten metal into a mold, offers a very reasonable production cost and is a good method for casting designs that are more visually oriented or when reducing weight is not a primary concern. The high heat used introduces impurities into the metals and results in a more brittle, branch-like microstructure that is more susceptible to breakage along its weak points. Cast wheels can be equal in strength to forged wheels but, in order to meet the demands for use on a vehicle, more alloy is used resulting in a heavier wheel. Cast wheels offer consumers the greatest variety of designs at the lowest price and are adequate for most street use applications.
Further research led scientists to develop a process whereby mechanically agitating (stirring/mixing) alloys during the solidification process changed the original microstructure of the alloy from a branch-like structure to a globule granular structure. Alumax then perfected the aluminum stirring process, Magneto-Hydro Dynamics (MHD), and created the basis of SSF technology which results in a pure cylindrical alloy billet consistently free of non-metals, gasses, oxides and other impurities. This MHD billet, when heated to a specific temperature, attains a semi-solid form (consistency of soft butter). After pressed into a mold at a very high rate, the shaped product retains the preferred globule granular microstructure. The end product is very dense and strong allowing the manufacturer to use less aluminum alloy and still meet the engineering criteria for the intended use.
Casting's Conventional
Branch-Like Alloy Structure
SSF's Semi-Solid Globule
Granular Alloy Structure
Today, SSR is the only wheel manufacturer in the world to produce SSF aluminum wheels. SSR continues to research ways to further develop SSF, creating beautiful, lightweight and strong wheels that benefit the customer via function and beauty as well as enhanced performance—all at a lower cost than forging or casting.