МегаПроект 4G63, ВСЕМ СРОЧНО ПОСМОТРЕТЬ!!!!! |
Здравствуйте, гость ( Вход | Регистрация )
МегаПроект 4G63, ВСЕМ СРОЧНО ПОСМОТРЕТЬ!!!!! |
30.6.2010, 23:31
Сообщение
#1
|
|
Зарегистрированный пользователь Группа: Пользователь Сообщений: 500 Регистрация: 9.9.2007 Из: Астана . KZ |
МЛИН ПОПУТАЛ С НАЗВАНИЕМ, Модеры исправьте пожалуйста на 4G63
Итак на Эвом идёт горячее обсуждение нового проекта с Греции (а еще говорят что там крызыс, есть нечего, внешине долги бешанные и т.д.) Прошу Вас обратить Особое внимание на использованные материлы И так начинаем - Цитата We just release it, Gt47 and gt55 killer. Outflows any turbo combination.
Its our new race turbo built it specialy for our new 122cui 4g63 project, full custom billet aluminum 7,8:1 p1/p2 map. T4 flange, quadbearing. 100psi capable |
|
|
30.6.2010, 23:45
Сообщение
#2
|
|
Зарегистрированный пользователь Группа: Пользователь Сообщений: 500 Регистрация: 9.9.2007 Из: Астана . KZ |
Цитата(Extreme Tuners;8450699) As I promise from another post, the other customer special project aiming ~2000hp! just a quick glance.
Billet engine block that can handle 100psi and loads under Methanol and nitro methanol extreme loads. there are versions with or without water passes, standar or taller. We will use our custom for this project design 600hp(per rod) billet aluminum rods. our custom billet 600hp rod near a 300hp aluminum rod. Here are the 858lbs (9.090cc) injectors, methanol and nitro compatible. 200psi capable we will use 4 of them and 4 of the 2450cc. Spyros |
|
|
Текстовая версия | Сейчас: 3.6.2024, 3:41 |